The Central Labour Institute (CLI), Mumbai was conceived by the Government of India during the first five year plan as a centre for research, training and consultancy on the various aspects of industrial work related to the human factor.
The institute commenced its activities in a rented building in 1961. On the 7th October 1954 the foundation stone of the CLI building was laid by the first Prime Minister of India, Late Pandit Jawaharlal Nehru. It was shifted to its present premises in 1966 when the building was inaugurated on the 9th February, 1966 by Late Dr. Sarvapalli Radhakrishnan, the then President of India.
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
Most of the chemicals that are used, handled, processed or manufactured in industries are harmful to the workers in varying degrees. These chemicals may be toxic, corrosive or carcinogenic and may cause health hazards through inhalation, ingestion or skin absorption. Technological measures are practiced in many industries to control toxic contaminants in work environment. However, there are situations when the use of respiratory devices becomes vital and essential.
Most of the Personal Protective Equipment (PPE) are manufactured in the small scale enterprises. These small scale industries do not possess adequate resources and facilities for testing raw materials and the finished PPE as per the Specifications laid down in relevant Standard prescribed by the Bureau of Indian Standards (BIS). They do not also have the research and developmental facilities. Technical guidance and advice is also not readily available to them for improving the quality of these equipment.
It has been observed from the Hand Book of Labour Statistics (1992), of Labour Bureau, Ministry of Labour, Government of India, Chandigarh/Shimla that every year more number of workers get exposed to the various types of chemicals and contract occupational diseases. Thus, PPE play an important role in safe-guarding the health of the industrial workers from various occupational diseases, provided they meet the requirements of the specified standard of BIS.
The main objectives of Respiratory Equipment Testing Laboratory are :
First Schedule {Section 2 (cb)} of the Factories (Amendment) Act, 1987 provides the list of 29 different industries involving hazardous processes
Second Schedule (Section 41-F) lists the permissible levels of 117 toxic chemicals causing various occupational diseases by entering into body through the vital respiratory mode. In view of this, it is of foremost importance to use various respiratory PPE as the preventive measures against these toxic chemicals.
Rule 81 of Model Rules under the Factories Act, 1948 (corrected upto 31.3.1987), Government of India, prescribes the use of various PPE.
A simple, inexpensive, comfortable and disposable type dust mask was developed by this Laboratory. It was made from low cost man-made fibres by the die-punch moulding technique. Developed masks were subjected to performance tests in accordance with the U.S. Bureau of Mines specifications. Extensive work was carried out on these masks to determine the performance parameters such as filtering efficiency, breathing resistance and mechanical strength. The complete know-how data was transferred to the National Research and Development Corporation (NRDC), New Delhi for its transmission to the industries for its commercial production.
Now, this Laboratory is equipped with the facilities to undertake the testing of canister, cartridge type respirators and dust respirators as per the Standard specifications laid down by the BIS.
Canister and cartridge type respirators are tested against the following gases and vapour.
Performance Tests : | |
Front or Back Mounted | Breathing Resistance : |
Chin Type |
|
Escape Type |
|
Similar tests as mentioned above
Reaffirmed in February, 1991 |
(face piece fitness test) |
Institutional fee is nominal and is basically promotional in nature. The current institutional fee for the service rendered by the Laboratory for testing of various types of respiratory PPE is levied as given below:
Sl. No. | Type of Respirator | Institute Fee (Per Sample) |
1 | Canister Type | Rs. 725/- |
2 | Combination of Cartridge and Mechanical Type (Particulate Filter) | Rs. 725/- |
3 | Cartridge Type | Rs. 725/- |
4 | Mechanical Type | Rs. 725/- |
5 | Breathing Air Cylinder | Rs. 725/- |
Adequate protection of body is essential in order to ensure the safety of human life at work in every industry though the nature of protection varies from industry to industry and is dependent not only on the type of operation but also on the kind of hazard associated. Personal Protective Equipment (PPE) are always recommend for use in industry to protect the workmen against physical, chemical, and biological agents which possess hazard potentials of causing harmful health effects to the workers. Various engineering control method and technologies are generally applied to minimise the degree and intensity of such occupational hazards ,but in case of certain industrial hazards ,but in case of certain industrial situations ,there is no choice but to recommend the use of PPE . The magnitude of use of problem of using PPE in industries have increased in the recent years due to the growth of modern technologies and effective safety awareness programme.
It has been well recognized that the degree of protection provided by the PPE to the workers greatly depends upon their selection, use, and the extent of their performance in actual operation. The use of Personal Protective Equipment (ppe) by the employees in the factories under different situations, is a statutory provisions made under Sections 32,35 and 36 of the Factories Act, 1948. The Bureau Of Indian Standards (BIS) has brought out many standards on Personal Protective Equipment for protection of eyes, face, ears, feet, legs ,hand, head, etc. in addition to guidelines for selection and use of such equipment. However, the testing facilities available in the few institutes in the country is not sufficient to ensure the quality of products as per the Bureau Of Indian Standards.
Therefore ,the Central Labour Institute , Mumbai has set up to a Non-Respiratory Equipment Testing Laboratory (NRTL) to carry out Performance test for different types of PPE’s as per the standards laid down by the BIS .The laboratory is equipped with all the sophisticated equipment that are needed for testing of PPE. At present the laboratory undertakes testing of samples of PPE and issues performance test reports in regard to the quality of protective appliances.
The various tests that could be undertaken by the laboratory as per the standards of the BIS are given in details.
Name of PPE | Tests that are carried out |
Safety Helmet | IS:2925-1984
|
Eye Protectors Safety Goggles Safety Spectacle | IS:5983-1980IS:7524(Part-I)-1979 Non-Optical tests
IS:7524(Part-II)-1979 Optical Tests
|
Welding Helmets Welding Hand Shield | IS: 1179 -1967
|
Filter :-- Welding Filter ,Ultra Violet Filter, Infra Red Filter | IS:1179-1967/IS:5983-1980
|
Filter Cover | IS:1179-1967/IS:5983-1980
|
Visor | IS:9973-1981
|
Face Shield with Plastic Visor | IS:8521(Part-I)-1977 IS:8521(Part-I)-1994
|
Safety Shoes Leather Safety Shoes | IS:5852-1996 / IS:11226 1993
IS:5914-1970
Water Absorption
IS:11226-1993/IS:13469-19923. Rubber/ PVC Sole and heels IS:3400(Part-XVI-)/12240(Part-7)
IS:2961-1973 IS:5677-1986 Chrome upper leather
Rubber PVC Sole and heels
Elongation at break IS:11226-1993/IS:13469-1992 |
Rubber /PVC Knee Boots ( Gum Boots ) | IS:12254-1993 IS-13695-1993
IS:13695-1993/IS:12254-1993 Rubber upper testing
|
Hand protectors
| IS:4770-1991
Tensile Strength Elongation at break
|
Safety Clothing /SafetyGloves ( Leather ) | IS:2573-1986
|
Hand protectors Safety Clothing (PVC Coated fabrics Double textured rubberized Water proof ness fabrics) | IS:6110-1983 IS:3322(Part-I)-1987
Longitudinal direction Transverse direction
|
The present charges for the services rendered by the laboratory for testing of different types of Non-Personal Protective Equipment are given below:
Type of Respirator | Institute Fee (Per Sample) |
Safety Goggles, Safety Helmet, Face Shield, Safety Hand-gloves, Safety Ear Muff and Ear Plug, Chemical Apron / Suit | Rs. 725/- |
Steel toe cap and Upper Leather and Sole of Safety shoe | Rs. 2175/- |
Safety Belt & Full Body Harness | Rs. 2425/- |
The samples along with institute fee (Demand Draft in favour of Central Labour
Institute, Mumbai) should be submitted 15 days in advance for reports.
Lifts and hoists are used for raising or lowering persons and goods from one floor to another within a building. They are driven by electric motor either directly (electric lifts) or indirectly through the movement of a liquid under pressure generated by a pump driven by electric motor (hydraulic lifts).
Electric lifts are almost exclusively driven by traction machines, geared or gearless, depending upon speed of the cage/car. The designation “traction” means that the power of electric motor is transmitted to the multiple rope suspension of the cage/car and counterweight by friction between specially shaped grooves of the driving or “traction” sheaves of the machine and the ropes. This one of the several safety features of the system, because, when the counterweight land on the buffer in the pit, traction ceases and the power is no longer available to move the system, cage/car-ropes-counterweight, into the upper structure.
The sheave grips the hoist ropes, so when the sheave rotates, the ropes also move. The sheave is connected to electric motor (2). When the motor turns one way, the sheave raises the elevator; when the motor turns the other way, the sheave lowers the elevator. In gearless elevators, the motor rotates the sheaves directly. In geared elevators, the motor turns a gear train that rotates the sheave. Typically, the sheave, the motor and the control system (1) are all housed in a machine room above the elevator shaft. The ropes that lift the car are also connected to a counterweight (4), which hangs on the other side of the sheave. The counterweight weighs about the same as the car filled to 40-percent capacity. In other words, when the car is 40 percent full (an average amount), the counterweight and the car are perfectly balanced.
The purpose of this balance is to conserve energy. With equal loads on each side of the sheave, it only takes a little bit of force to tip the balance one way or the other. The motor only has to overcome friction -- the weight on the other side does most of the work. To put it another way, the balance maintains a near constant potential energy level in the system as a whole. Using up the potential energy in the elevator car (letting it descend to the ground) builds up the potential energy in the weight (the weight rises to the top of the shaft). The same thing happens in reverse when the elevator goes up. The system is just like a see-saw that has an equally heavy kid on each end.
Both the elevator car and the counterweight ride on guide rails (5) along the sides of the elevator shaft. The rails keep the car and counterweight from swaying back and forth, and they also work with the safety system to stop the car in an emergency.
This system prevents over speeding of the cage. Most governor systems are built around a sheave positioned at the top of the elevator shaft. The governor rope is looped around the governor sheave and another weighted sheave at the bottom of the shaft. The rope is also connected to the elevator car, so it moves when the car goes up or down. As the car speeds up, so does the governor.
In this governor, the sheave is outfitted with two hooked flyweights (weighted metal arms) that pivot on pins. The flyweights are attached in such a way that they can swing freely back and forth on the governor. But most of the time, they are kept in position by a high-tension spring. As the rotary movement of the governor builds up, centrifugal force moves the flyweights outward, pushing against the spring. If the elevator car falls fast enough, the centrifugal force will be strong enough to push the ends of the flyweights all the way to the outer edges of the governor. Spinning in this position, the hooked ends of the flyweights catch hold of ratchets mounted to a stationary cylinder surrounding the sheave. This works to stop the governor.
The governor ropes are connected to the elevator car via a movable actuator arm attached to a lever linkage. When the governor ropes can move freely, the arm stays in the same position relative to the elevator car (it is held in place by tension springs). But when the governor sheave locks itself, the governor ropes jerk the actuator arm up. This moves the lever linkage, which operates the brakes.
In this design, the linkage pulls up on a wedge-shaped safety, which sits in a stationary wedge guide. As the wedge moves up, it is pushed into the guide rails by the slanted surface of the guide. This gradually brings the elevator car to a stop.
Lifts also have electromagnetic brakes that engage when the cage comes to a stop. The electromagnets actually keep the brakes in the open position, instead of closing them. With this design, the brakes will automatically clamp shut if the elevator loses power.
Lifts also have automatic braking systems near the top and the bottom of the elevator shaft. If the lift cage moves too far in either direction, the brake brings it to a stop.
If all else fails, and the lift does fall down the shaft, there is one final safety measure that will probably save the passengers. The bottom of the shaft has a heavy-duty shock absorber system -- typically a piston mounted in an oil-filled cylinder. The shock absorber works like a giant cushion to soften the elevator cage's landing.
Prior to putting a lift into service and also when some modification /alteration major repair work is done, it should be examined and tested by an organization approved by the public authorities to establish its conformity with the applicable up-to-date standards. A technical dossier should be submitted to the public authority before putting the lift into service. The various elements to be examined and tested should include:
Certificate of the corresponding components used in the installation should be included in the register. To check whether the lift has been kept in good working condition periodic through examination should be conducted by a competent person who has obtained skill and thorough knowledge of the mechanical and electrical defects of the lifts, safety rules and has been declared competent to conduct such examinations by the statutory public authority.
The examination is carried out to find out if the lift can continue to be used safely. A written report of the examination has to be made and given to the owner of the lift. If the examination has revealed that repairs are needed, the report must say this and give time limits by which the repairs have to be made. Lifts must be thoroughly examined every six months.
A thorough examination is a systematic and detailed examination of the lift and all its associated equipment by a competent person. Its aim is to detect any defects, which are, or might become, dangerous, and for the competent person to report them to the occupier so that appropriate remedial action can be taken.
To determine the extent of the thorough examination, the competent person will assess the risks, considering factors such as where the lift will be used, frequency of use, age and condition, the weight of loads to be lifted, etc.
A thorough examination may include some testing, if the competent person considers it to be necessary. The competent person will normally determine what tests are required, taking account of the relevant guidance and standards and occupier /owners are recommended to insist on this approach.
Thorough examination may also be supplemented by inspection. Inspections should be carried out at suitable intervals between thorough examinations and may be done ‘in-house’ by a competent, trained employee. Inspections would normally include visual and functional checks, e.g. that the alarm interlocks operate correctly and lift doors cannot be opened from the landing side.
Thorough examination should not be confused with preventive maintenance, although they have some elements in common. Preventive maintenance usually involves replacing worn or damaged parts, topping up fluid levels and making routine adjustments to ensure risks are avoided. Thorough examination may act as a check that maintenance is being carried out properly, but is not intended to replace it.
Thorough examination should include the following:
This list is not exhaustive. Further guidance can be found in the model rules framed by DGFASLI and adopted by various states in their State Factories Rules.
The lift should be regularly serviced by a reputable maintenance company (about every three months). The service report provided should relate to the efficient working of the lift and does not replace the thorough examination mentioned above. Any repair work identified should be done as soon as possible.
The safety steps given below will reduce the risk of accidents caused by or in lifts, and may be used as a safety checklist.
Rope Lay length: Lay length of a wire rope is the distance along the axis of the rope through which a single strand completes one cycle in the rope.
The external inspection criteria for general usage running rope is as follows:
Reduction of nominal rope diameter due to loss of core support or internal or external corrosion or wear of individual outside wires. The diameter shall be measured in a circumscribing circle in six or more places on the rope.
A wire rope can be opened for internal inspection only when completely relaxed. Using care to avoid damaging the strands or core, open the wire rope in six or more places, by working a marlin spike beneath two strands. Carefully rotate the spike to expose the core and underside of the strands. Inspect for evidence of internal corrosion, broken wires, or core failure. Particular attention should be given to the wire rope in areas close to end fittings, those lengths that pass over sheaves, onto drums, or that remain exposed to or immersed in seawater. If a wire rope has been opened properly and carefully, and internal condition does not show cause for removal, the strands can be returned to their original working positions without distorting the wire rope or impairing future usefulness. Only qualified personnel shall be authorized to inspect wire rope.
Any marked reduction in rope diameter is a critical deterioration indicating factor. It is often due to excessive abrasion of the outside wires, loss of core support, internal or external corrosion, inner wire failure or loosening of rope lay. All new ropes stretch slightly and decrease in diameter after being used. This is normal but the rope must be replaced if the diameter if reduced by more than:
Occasional premature wire failure may be found in the life of almost any rope and they should not constitute a basis for the rope replacement provided such wire failures are at well spaced intervals. The broken wire ends should be removed as soon as possible by repeatedly bending them backwards and forwards with the help of a set of pliers, by doing this the broken wires get tugged between the strands and may not do further harm to the wire rope. The rope must be replaced if:
Occupier of every factory involving hazardous process is statutorily required under Section 41-B(1) of the Factories Act to disclose in a prescribed manner all the information regarding danger, including health hazards and the measures to overcome such hazards arising from the exposure to or handling of materials or substances in the manufacture, transportation, storage and other processes, to the workers employed in the factory, the Chief Inspector, the local authority within whose jurisdiction the factory is situated and the general public in the vicinity.
Model Rule No.82-C made under Section 41-B read with Section 112 of the Factories Act has specified that the occupier of any factory carrying out hazardous process shall arrange to obtain or develop information in the form of Material Safety Data Sheet (MSDS) in respect of hazardous substances or material handled in the manufacture, transportation and storage in the factory.
Every such MSDS sheet includes information on identification/labeling; hazardous ingredients, physical and chemical characteristics; potential fire, explosion and reactivity of the hazardous substances; health hazards involved; primary root of entry; permissible limits of exposure prescribed in the Second Schedule under Section 41-F of the Factories Act; precautions for safe handling and use of hazardous substances; emergency and first-aid procedures, date of preparation of MSDS as well as name, address and telephone number of the manufacturer, importer, occupier of other responsible party, preparing or distributing the MSDS.
This division provides MSDS on request to industries at a nominal payment, enquires can be made by writing to Director- In charge (MIS)
Occupational disease assume a significant dimension in any country and more particularly, in a developing nation like India. There is a considerable prevalence of common disorders like lead poisoning, silicosis, asbestosis, pesticides poisoning, occupational hearing loss, etc. among the industrial workers.
While the emphasis on the prevention, early diagnosis and management of occupational diseases are well accepted as the proven strategy equally important is facilitating for confirming the cases of occupational diseases as these involve legal liabilities. In recognition of this need as well as in recognition of the fact that such referral facilities are scarce in our country, a NRDC has been established by DGFASLI in the Central Labour Institute.
Suspected cases of occupational diseases are referred to these centers by Factory Medical Officers, Medical Inspectors of Factories, Certifying Surgeons, Public hospitals, etc. for opinion. The cases are physically examined, subjected to investigations at the institute and report is given by co-relating with the occupational history before arriving at a confirmed diagnosis.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.
A pilot project on supervisory training was organized in India by the International Labour Organisation in 1952. Encouraged by the results of the pilot project and realising that such training is an essential requirement for the successful implementation of the plans for the industrialisation of the country the Ministry of Labour, Government of India set up the Training Within Industry (TWI) Centre in Mumbai in 1955 with the assistance of the ILO. In keeping with the changing trend of manpower training and development activities, the centre was later renamed as the Staff Training Division.
The division :
Over a period of time the activities have expanded to cover the training of management and trade union representatives to help organisation, create a climate conducive for the development of collaborative leadership and bring about improvement in working conditions and productivity. Towards this end, new courses for managers, supervisors, trade union representatives and bipartite forums covering socio- psychological and team building aspects have been developed and conducted.
The division has embarked upon the training of supervisory trainers in chemical industries and trainers of dock workers to help organisations discharge their training responsibility on safety and health aspects under the amended Factories Act and the Dock Workers (Safety, Health and Welfare) Regulations, respectively. These trainers, in turn, undertake the training of supervisors/workers on safety and health aspects in their organisations.
The productivity division aimd at improving productivity vis-a-vis working conditions and promoting co-operation between labour and management in industrial units. The above objectives are sought to be achieved through training courses and consultancy projects. In consultancy projects a management and labour project team is formed and the experts of the division act as technical consultants and catalyst to the team.
Some of the courses conducted by the division are :
Man-power planning, job evaluation, productivity improvement, organisation and methods and wage incentives are some of the consultancy areas.
Major Accident Hazards Control division (MAHC) formerly known as Major Accident Hazard Control Advisory (MAHCA) Division added to the CLI as well as in RLIs located at Chennai, Kanpur, & Kolkata in 1987. This Division was the outcome of the ILO project “Establishment and Initial Operation of Major Accident Hazards Control System” The project was executed by DGFASLI in collaboration with Factory Inspectorates of the various States and Union Territories. Although the project was completed in December, 1990, divisions continue to provide important services for the control of major accident hazards in the country. The activities of divisions were gradually enlarged to include other aspects of chemical safety. The name of the division was changed since the year 2007.
The important achievements are :
Major Accident Hazards Control division offers the following services :
The objective of the division is to provide information services on occupational safety and health, function as a reference source and also as a center for dissemination of information, which will contribute to the prevention of occupational accidents and diseases.The division comprises of a INDOSHNET centre, CIS National Centre for India and a Library-cum-Information Centre.
In order to achieve the above objectives, the division has taken up the following activities:
.
This division is developing a National Inventory on OSH Information. As a beginning to this inventory data has been collected form the state of Kerala. The major areas identified for the national inventory of OSH information are :
The exercise is to be carried out in all the other states of the country so as to have a comprehensive database on Inventory of OSH Information.
Indoshnews
This quarterly newsletter is intended to reach to the people round the globe and bring about awareness in matters related to safety and health, highlight important issues, latest developments, current events in the area of safety and health It includes abstract on material safety data sheets, book reviews, finding of the studies and other relevant information on occupational safety and health training programmes
As a CIS National Centre for India this Directorate provides information and services on:
The Work Environmental Engineering Division of Central Labour Institute, Mumbai is a combination of engineering and industrial hygiene branches dealing with identification, assessment and control of physical hazards in industries.Although the emphasis is given on the engineering control of the working environment, it is important not to forget the recognition of potential health hazards is done by the industrial hygienist. The WEED indentifies the cause and effect relationship of physical hazards to exercise the engineering control to eliminate the work environmental hazards for protecting workers from occupational diseases. WEED also deals with logical and systematic approach toward recognizing and defining the potential exposures that exist within the occupational work environment which cannot be underestimated. WEED helps the industries for solving a problem of physical hazards and concludes with adequate data to support that conclusion. The WEED presents an outline of procedural method that can be used to recognize and evaluate physical hazard exposures that may be present within the work environment to provide a logical method of controlling the exposure. The Division is well-equipped with Environmental Engineering Parameters and sophisticated monitoring equipments for industrial research, study and consultancy services including In-plant and In-house training programmes in the following areas;
The Regional Labor Institute, Chennai was established in the year 1980 with its own Safety, Health and Wellness Center located in rented premises at Royapetta. All the activities and facilities of the institute were then consolidated into its own campus at 1 Sardar Patel Road in an area donated by the state government. The institute was formally inaugurated by the then Hon'ble Chief Minister of Tamil Nadu, Shri M. Bhaktavatchalam in the presence of the then Hon'ble Union Labor Minister Mr. D. Sanjeevaiah and serves the southern states of the country.
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.
The Regional Labour Institute, Kanpur was started on 31st March, 1962. The current building was inaugurated on 6th July, 1965 by the Hon'ble Chief Minister of Uttar Pradesh Shrimati Sucheta Kripalani. The institute serves the states of Uttar Pradesh (Except NCR), Uttarakhand, Madhya Pradesh, Rajasthan, and Chhattisgarh.
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.
The Regional Labour Institute, Kolkata was set up at Lake Town, Kolkata on 28th June in the year 1965 with UN Special assistance under ILO and Colombo Plan Programme It was inaugurated by the then Hon'ble Union Labour Minister Shri D. Sanjivayya at a function presided over by Shri P.C. Sen, the then Hon'ble Chief Minister of West Bengal. The institute serves the Eastern States of the country. RLI, Kolkata is a technical arm (Sub-office) to DGFASLI, Mumbai which is attached to Ministry of Labour & Employment, Government of India, New Delhi.
JURISDICTION OF RLI, KOLKATA
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.
The Regional Labour Institute, Faridabad, was inaugurated on 10th February 2009 by the then Hon’ble Union Minister of State for Labour & Employment (Independent Charge) Shri Osacar Fernandes to serve the Northern States/UTs of the country namely Haryana, Punjab, Himachal Pradesh and U.Ts of Delhi, Jammu & Kashmir and Ladakh. Regional Labour Institute, Faridabad has been declared as a Centre of Excellence in Safety in MSME and Chemical Process Industries.
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.
The foundation stone for the construction of a Regional Labour Institute at Shillong was laid by the Hon’ble Union Minister of State (Independent Charge) Labour & Employment, Shri. Bandaru Dattatreya on 06.01.2017. The Regional Labour Institute, Shillong has is developed with the objective of providing technical services for improvement of Safety, health and well- being of workers employed in factories & other industries. This institute will cater the needs of the industries and promote occupational safety, health and work environment in the North Eastern states.
The Divisions in CLI are organised as below :
The Industrial Safety division aims at achieving improvement in working conditions and safety standards of factories and docks through training,consultancy, field studies, surveys and other promotional activities. It has contributed to the following achievements:
National surveys are conducted for ascertaining the status of working conditions and standards of safety in particular industries and operations.
Unit level studies are carried out with the objective of assessing the safety related problems and formulating recommendations for improvements. These studies also help the management to take necessary measures towards setting up safety systems, instituting safety programmes and achieving the goal of better safety in their organisations. Consultancy studies are undertaken at the request of the management or government agencies like the Factory Inspectorates for studying specific problems and rendering advice for corrective measures. The findings of national surveys and unit level consultancy studies become the source of technical inputs while drafting Rules & Regulations and designing various occupational safety and health intervention modules for target groups.
Safety audits are conducted on request from Factories and Ports.
In keeping with its pioneering role in the field of industrial safety, the division has been conducting training for the benefit of industries, Factory Inspectors, Labour Administrators and Trade Unions.
Specialised training courses are conducted for identified target groups such as Senior managers, Safety officers, Supervisors, Trade Union officials, and Safety Committee members from the industry. Some of these courses are :
In view of the need of inspection of specific industries and major hazards control, specialised courses are also conducted to impart necessary technical knowledge and skill to the Inspectors of Factories Act 1948.
In order to provide industries and docks sector with qualified safety officers the division division conducts one-year post diploma course in Advance Diploma in Industrial Safety (ADIS) affliated to Maharashtra State Board of Technical Examinaton.
The Industrial Safety, Health and Welfare Exhibition Centre have exhibits to demonstrate methods, arrangements and appliances for promoting safety and health of workers. This centre has models and exhibits regarding safety, health and welfare in the form of properly guarded machines, personal protective equipment, safe methods of material handling, light and colour schemes and other arrangements, for propagating the message of safety and other health of workplaces. This centre is open to organised groups from industry and educational institutions.
The Environmental Engineering Division was added in Central Labour Institute, Mumbai during Seventies with an object to carry out research, consultancy, and training activities in the field of engineering interventions for control of occupational health hazards related to airborne contaminants and physical hazards including Noise, Thermal stress, vibration, faulty industrial illumination etc.
The Industrial Hygiene division is concerned with the improvement of industrial work environment and comprises Industrial Hygiene Laboratory (IHL), Respiratory Equipment Testing Laboratory (RETL) and Non-Respiratory Equipment Testing Laboratory (NRTEL).
The division undertakes various studies/surveys, national projects and training courses to protect the health of industrial workers through identification, evaluation and control of occupational health hazards and advises the management on ways to meet the requirements prescribed in the Second Schedule (under Section 41F) to the Factories (Amendment) Act, 1987.
The RETL tests the performance and efficiency of indigenous respiratory personal protective equipment such as dust respirators and canisters/cartridge gas respirators,etc.and advises manufacturers on improvements required to meet prescribed standards.
The NRETL carries out the testing of indigenous non-respiratory personal protective equipment such as safety shoes,safety helmets,safety goggles, eye protectors, etc. These personal protective equipment are tested as per the specifications set by the Bureau of Indian Standards(BIS). Based on the test reports, technical advice and guidance on quality improvement are suggested to the entrepreneurs and manufacturers. User industries are also advised on proper selection, use, care and maintenance of various personal protective equipment.
The division also organises training courses in the areas of industrial hygiene for the specific group of industries given in the First Schedule, Section 2(cb) of the Factories (Amendment)Act,1987. These training courses are meant to help safety officers,chemists, supervisors and middle level managers in the identification, assessment and control of occupational hazards in their factories.
The Industrial Medicine division aims to prevent and contain health hazards at the workplace brought in by industrialization. The hazards may arise from chemicals or from physical factors such as noise, heat, dust, vibration and radiation.
Occupational Health studies and surveys on industries manufacturing asbestos products, dyestuff, cement, chemical, engineering and ports handling such products are carried out to assess the incidence of occupational diseases by the division. Suitable recommendations such as medical surveillance, use of personal protective equipment, facilities for personal hygiene and first-aid are made to prevent and control health hazards.
The division also carries out training programmes for factory medical officers and workers on occupational health hazards and first-aid. Division also conducting a three-month certificate course “Associate Fellow of Industrial Health (AFIH)” for factory medical officers every year since 1993 as per statutory requirement of Factories Act .The laboratory attached to the division has facilities for medical investigation, including ILO radiography, visual acuity tests, Audiometric evaluation, and Pulmonary Function Tests.
Environmental physiology - It helps to identify and assess the impact of factors like heat, humidity, thermal radiation and movement of air in the working environment so that limits of heat stress for day-to-day industrial work can be stipulated and suitable remedial measures prescribed.
Respiratory physiology - It determines the effects of dust, fumes, toxic gases, etc. on the pulmonary functions and work capacity of the exposed individuals and suggest remedial measures.
In the area of ergonomics the emphasis has been laid on the collection of anthropometric data from different regions of the country, which can be used in the design of work station, machinery, equipment, tools, etc.
The division conducts specialised training courses such as industrial ergonomics, occupational stress and industrial heat, etc.